Hi, I’m Calli
Welcome! If you enjoy your visit, be sure to follow me:
Oh My Stars!
Canning Day Quilt

Picnic Basket Part 4: Salad Bowl Cover

The inspiration for this project came from the talented Mayaluna of maya*made.  She posted a tutorial on making a picnic bowl cover strap, made out of an old shirt, no less.

I loved her tutorial so much, I decided to make a whole cover for a picnic salad bowl to match my picnic basket.

This little cover is perfect for taking to a potluck or picnic.  It serves to keep out any unwanted pests, and it won’t blow off in a breeze.

Plus it looks great.

Here’s how to make this quick and easy project:

This cover was made for a 10 1/2″ wide salad bowl and can easily be adjusted to fit a smaller or larger bowl.  You’ll just need to do a little calculating to adjust the size of the circle and ruffle.

You’ll need:

  • 12″ circle of center fabric
  • 5″ x 40″ strip of ruffle fabric
  • 25″ of 1/4″ elastic

Start by cutting out a 12″ circle.  I traced a large mixing bowl directly on the fabric, using a fabric marking pen.  As you can see, I can’t get enough of this lovely lemon fabric from Alexander Henry, called Juicy.

Cut out a 40″ long x 5″ wide strip of fabric to make the ruffle.  I was using a leftover scrap of fabric, so I had to piece my strip once.  Make it do, I always say.

Fold your strip in half width-wise and press along the length of the strip.

Make a hem at each end, by turn the ends 1/2″ twice.  Press.  The picture above shows the pressed hem at the end.

Stitch the hem to finish the edge.

Fold it back in half and press again.

Stitch the length of the ruffle 1 1/4″ from the folded edge.

Pin the ruffle around the circumference of the circle.  Wow, that looks like a lot of pins.  And it was.  But I wanted my seam to be neat and tidy along the edge.  Make sure the two ends come together nicely.

Using a 1/4″ seam, stitch ruffle into place.

Press your cover.  I just love the early morning light in my kitchen.  I love sewing before anyone else in the family wakes up.

Cut a 25″ section of 1/4″ wide elastic.

See that old extra-large safety pin.  I’ve had the same one for years… and it’s threaded many elastics through fabric.

Thread the elastic on through, making sure to keep hold of the other end.  The opening is nice and wide and easy to thread.

Make sure it’s not twisted anywhere, and stitch your elastic together.

And you are done.  It looks like an old-fashioned night cap.

Until it is fitted on your bowl.

No hornets or flies will bother our salad…  and it looks so pretty, I can’t wait for our next picnic.



Share and Enjoy:
  • Digg
  • StumbleUpon
  • del.icio.us
  • Facebook
  • Twitter
  • Google Bookmarks
  • Google Buzz
  • Yahoo! Buzz

6 Responses to “Picnic Basket Part 4: Salad Bowl Cover”

Leave a Reply for Jennifer

Archives


Virtual Quilting Bee